Free Nokia Unlock codes

Unlock Codes for Mobile Phones- free Nokia Samsung Unlocks


NOKIA
cell phone code :These Free Nokia Unlock codes will work on most Nokia Mobile Phones
(1) *#06# For checking the International Mobile Equipment Identity (IMEI Number).
This is useful when your mobile is lost or stolen.Free Motorola and Samsung Unlock codes are in another post.

If u find any difficulty to understand this Unlock code for Mobile Phones please write in comment section.
2) *#0000# Displays your phones software version,
1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favorite )
(3) *#9999# Phones software version if *#0000# does not work.
(4)*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%



If mobile is locked you can check by this way

(8) #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(9) #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(10) #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(11) #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

How To unlock mobile Phones like Samsung, Nokia and Motorola
For different networks they lock different locks. Each code also unlocks different locks. You need to type your code into your handset as follows
#pw+[one of the below numbers]+x#

{To get the p push your * key 3 times, the w is the * pushed 4 times and for + is the *pushed2 times. }
X= how far down that list the number you are using is...

014023433202622 (1)
426357740475450 (2)
907372026565074 (3)
845941163371047 (4)
484167302243762 (5)
497227217504624 (6)
705550724347656 (7)
You should always try code 7 and 1 first.
So you would type for code7


#pw+705550724347656+7# and
for code 1 it is
#pw+014023433202622+1#.To get the p push your * key 3 times, the w is the * pushed 4 times and+ is the pushed 2 times.
When the lock has been removed it will say "SIM restriction off" or somthing similar.

(12) *#147# (vodafone) this lets you know who called you last.
(13) *#1471# Last call (Only vodofone).
(14) *#21# Allows you to check the number that "All Calls" are diverted to
(15) *#2640# Displays security code in use.
(16) *#30# Lets you see the private number.
(17) *#43# Allows you to check the "Call Waiting" status of your phone.
(18) *#61# Allows you to check the number that "On No Reply" calls are diverted to.
(19) *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.
(20) *#67# Allows you to check the number that "On Busy Calls" are diverted to.
(21) *#67705646# Removes operator logo on 3310 & 3330.
(22) *#73# Reset phone timers and game scores.
(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.
24) *#7760# Manufactures code.
(25) *#7780# Restore factory settings.
26) *#8110# Software version for the nokia 8110.
(27) *#92702689# (Favourite)
Displays -
1.Serial Number,
2.Date Made,
3.Purchase Date,
4.Date of last repair(0000 for no repairs),
5.Transfer User Data. To exit this mode you need to switch your phone off then on again.

(28) *#94870345123456789# Deactivate the PWM-Mem.
(29) **21*number# Turn on "All Calls" diverting to the phone number entered.
(30) **61*number# Turn on "No Reply" diverting to the phone number entered.
(31) **67*number# Turn on "On Busy" diverting to the phone number entered.
(32) 12345 This is the default security code.press and hold # Lets you switch between lines
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4


Nokia unlock codes 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #

NOKIA 3110IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

NOKIA 3330 unlocks
*#06# This will show your warranty details *#92702689#
*3370# Basically increases the quality of calling sound, but decreases battery length.
#3370# Deactivates the above
*#0000# Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370# Half Rate Codec activation. It will automatically restart
#4370# Half Rate Codec deactivation. It will automatically restart

Restore Factory Settings To do this simply use this code
*#7780# Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only) This will put your phone into programming mode, and you'll bepresented with the programming menu.
2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours, ask your local dealer for it.
8) Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code To check the ISDN number on your Nokia use this Free nokia Unlock code *#92772689
#.::

As I tried to collect most common Unlock code for mobile phones.It may not work with some models.

Nokia Phone Unlock Codes

Nokia unlock codes

Nokia phone unlock codes for free. There are different nokia unlock codes for different nokia models like nokia 6288, n95, Nokia 6682, 7270, 6280, 1600, Nokia 6130. Even there are two types of mobile unlocking service provider unlocking – sim unlock. You can also get mobile unlocking software that will generate codes for unlocking
Free Nokia Cell Phone Unlock Codes

1) Unlock Nokia 6600 (Orange, UK)
#pw+399466210777312+1#
#pw+719950237732007+5#
2) Unlock Nokia 3390 (Fido, Canada)
#pw+6595657252+1# or
#pw+4474052474+1#
3) Unlock Nokia 6102 (Cingular, USA)
#pw+939652056653040+1#
4) Unlock Nokia 6820b (AT&T, USA)
#pw+895421713251412+1#
5) Unlock Nokia 6102b (Cingular, USA)
#pw+324556243142742+1#
6) Unlock Nokia 6010 (T-Mobile, USA)
#pw+748900573631603+1#
7) Unlock Nokia 3120 (Vodafone, Spain)
#pw+008923325642375+7#
8) Unlock Nokia 6101 (T-Mobile, USA)
#pw+110464135761655+1#
9) Unlock Nokia 6230 (Vodafone, UK)
#pw+737190152533105+7#
10) Unlock Nokia 7600 (3 Network, UK)
#pw+448917267516205+1#.




         If you have latest nokia smartphone like nokia lumia 730 dual sim or nokia lumia 1520 32gb then here is the nokia lumia smartphone secret codes. These codes are useful to unlock hidden menu of your nokia android. This code are used for sim lock status of lumia 1020, service provider lock of nokia lumia 930 and various useful function for nokia wifi test, screen test and many test mode code for nokia lumia smartphones.

LG Codes

LG cdma service code and Lg cdma mobile secret codes

This LG Codes are different from lg unlock codes.

LGC-300 programming: menu + 9 and enter SPC: "000000" or may be other SPC typed by user
A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key
LGC-330W programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-800W /500 programming: menu + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-510 programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key

LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200

1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete

LG5350

1. Enter ## and enter the OTKSL and press the left soft key under the word “Save”
2. At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key.


         These codes are for lg cdma mobile but if you are looking for lg smartphone codes then here is the detail of secret lg smartphone codes for various lg android phones. This codes are applicable to newer lg smartphone like  lg g2,lg g3, lg g5, lg v10 having android marshmallow, kitkat and lollipop software.
 



Samsung cellular phone unlock

Samsung cellular phone Unlock CODE

Samsung cellular phone SGH-600 : *2767*3855#

samsung S100, S300, V200 : *2767*7822573738#

---A300, A800 : *2767*637#

---X100 : *2767*688#

samsung cellphone sgh-600 mobiles : *2767*3855#

s100,s300,v200 : *2767*7822573738#

s105 mobiles : *2767*7822573738#

After the phone reboots enter the following code : #0111*00000000#

Personalisation cancelled should be displayed. cellular phone is now unlocked

a800,a300 mobiles : *2767*637#

t100 : *2767*media#
*2767*full#
*2767*cust#
*2767*wap#
*2767*stackreset


for example stackreset = 7822573738

e700 : *2767*688#



Here some more codes for samsung T100

*#8999*228# -> Battery status (capacity, voltage, temperature)
*#8999*246# -> Program status for samsung mobile phones
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens of cellular phone
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status for samsung phone
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version of new cellular phone
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown


all samsung s300 and v200 and s500 : Free unlocking by codes

samsung mobile phone s300 and v200 :

*2767*63342# and press green button
*2767*3855# and press green button of samsung cellular phone
*2767*2878# and press green button
*2767*927# and press green button
*2767*7822573738# press button of samsung cellphone


samsung mobile phone s500 : *2767*688#

Samsung CDMA Codes

Samsung cdma Service Code

Samsung unlock codes are different then service codes.

Samsung:
All type of phones (old modeles):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##

Samsung A500

1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete

Samsung N240 and N400
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming

Samsung Uproar
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete

Samsung N300
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #

Motorola Unlock Codes

Motorola unlock code-V300 Motorola razr Cell phone Unlock


Unlock motorola codes for v3 and razr.
motorola cellular T205/T19x
most of the code applicable to Motorola d460,6200,Motorola cellphone 7500,
Motorola Unlock codes for 8200,8400, 8700,V3688.
*#06# -> Displays imei for
*#300# OK -> List the Software & Hardware Version of motorola cellular
*#301# OK -> Full Keypads Functional Test
*#303# Ok -> Set Default Language to English
*304# OK -> Set OFF engineering mode new cellular phone
#304*19980722# -> Set ON Engineering mode
*#305# OK -> Location: 1 OK
*#307# OK -> Engineering Test Mode
*#311# OK -> Phone code changed to default code
*#400# OK -> ADC, Cal val*
*#402# OK -> Adjust Display Intensity/Contrast
*#403# OK -> List the manufacturing Informations of motorola cellular
19980722 OK -> Master Unlock code for Phone & Sim
Lock.
this code are independent of whether it is new cellular phone or pre paid cell phone.And it may work with one model and not working with other model like Unlock Motorola rarz code may not work with motorla v3.
*#302# OK -> Acoustic Test*
*3370# -> Enhanced Full Rate
#3370# -> Deactivate Enhanced full Rate
*#72837726# OK -> Confirm?, Data Saved
1234 OK Phone Code Default
*#0000# OK -> Settings saved, restore set phone
to default language.

new cellular phone EFR:
###119#1#, (OK) to activate EFR mode.
###119#0#, (OK) to deactivate EFR mode.

Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.


Other Secret Master Codes for Motorola phones.


Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu of motorola cellphone:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] [] [] 1 0 7 [] 1 []
Copy SIM memory (phonebook menu):
[] [] [] 1 0 8 [] 1 []
Eng Field options (main menu):
[] [] [] 1 1 3 [] 1 []
Slow (Frequency of search menu):
[] [] [] 1 0 1 [] 1 []
Medium (Frequency of search menu):
[] [] [] 1 0 2 [] 1 []
Fast (Frequency of search menu):
[] [] [] 1 0 3 [] 1 []
Enable EFR:
[] [] [] 1 1 9 [] 1 []
Function :
[] [] [] # # # [] 1 []

Change pin:
[] [] [] 0 0 4 [] 1 []
Unblocking using the "puk" number:
[] [] [] 0 0 5 [] 1 []


You can change motorola cellular GSM frequencies to 900/1800 by entering the enginnering model. Following the below steps:
enter menu and press 048263* quickly, then you will enter the secret engineering menu
under "Opcode"
input 10*0*3 for GSM 900
10*0*4 for GSM 1800
10*0*5 for GSM 1900
10*0*6 for dual band GSM 900/1800
10*0*7 for dual band GSM 850/1900

To add extra message space 4 your Motorola C350 C450 C550 or C650, press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.You will receive an extra 50 msgs memory space.Switch phone off and back on.(not tested)

Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK]
* - press this until box shown up

Activate RBS (Radio Base Station) Motorola cellphone.

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This only works with some versions of software.

What's the use of RBS:

Get Distance From Base Station
- Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.




Other Phones from Motorola cellular (CD 160, CD 520, 920, 930)
new cellular phone Motorola CD 160
Press menu and type one of these numbers and press OK:

11 = Status Review for new cellular phone
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer for Motorola cellular
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode.



Free call tip1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.


Keyboard lock fo Motorola cellular
if you push * and # on the same time your keyboard locked. When you press it again, you unlock your keyboard.

Supplementary Menu for Motorola cellular
If your Motorola CD920 or 930 has the engineering software, you can get an engineering mode by typing : ***113*1*, but you have to maintain each * during 3 sec to get a square. So 3 squares, 113, 1 square, 1, 1 square, CALL.
If the software is present you have one supplementary menu. To remove it typ ***113*0* like above.

To put the counter to 0 even global counter, just do a reset factory in the Config menu.

In future give u more on Motorola unlock codes for v3 and motorola rarz cellular phone.

how to sim unlock lg v10 for free



At&t lg v10 sim network unlock code from imei number, bell verizon t-mobile lg v10 unlocking to work with any sim network and how to recover lg v10 unlock code.



                                       Lg v10 cdma /gsm/  evdo/ lte has snapdragon 808 chipset hexacore cpu with nano sim, 4gb ram and internal storage 32gb/ 64gb. It has android lollipop os version 5.1.1 and can be upgradable to android os version marshmallow 6.0. Lg v10 can record smooth video with rear 16mp camera and two 5mp front camera and having two screen main screen and second screen quad hd display resolution 2560x1440.


                                 I am providing you two different ways for sim unlocking lg v10 t-mobile at&t smartphone. In first method we unlock lg v10 android phone without sim network unlock pin or network unlock code so you can use your lg v10 unlocked mobile on any gsm sim network. In second method we unlock lg v10 by generating sim network unlock pin for free. And I also explain how to generate sim network unlock pin for lg v10 t-mobile.

                                        By above second method you can unlock lg v10 all models including at&t lg v10 h900 space black opel blue, unlock Verizon lg v10 vs990 luxe white, unlock t-mobile lg v10 h901bk space black, unlock lra lg v10 rs987, lg v10 h960 unlock, unlock lg v10 f600s – k – l, lg v10 dual sim h961n unlock and lg v10 dual sim 962 unlock. It also unlocks lg v10 h903/ h904 / h908 / h909.

Why you need to unlock lg v10 smartphone
                                          You have bought at&t t-mobile lg v10 with sim locked. Now you have two working sim card and you want to use those sim to lg v10 dual sim or you want to use another sim to your lg v10 android. When you enter new sim to lg v10 on your lg screen you get message that network locked sim card inserted, wrong sim card, invalid sim card unlock your phone, phone restricted enter phone restriction code, contact service provider to unlock lg v10. Now to use all gsm sim on your lg v10 you need to unlock lg v10 phone with sim network unlock code.

                                             Before continuing to two different methods for lg v10 unlock. I give you some tricks to recover network unlock code/ sim unlock code from your lg v10 mobile. When you mobile locked it’s unlock code must be within its android os file system. So first download any file explorer of lg v10, lg bridge also a good file explorer but I am not sure it can go deep into file system.  

                                    First go to lg v10 setting and enable root explorer and enable mount file system and also allow su superuser. Now search inside root folder there is an efs folder under efs folder find nvdata file. Nv data is a non volatile memory which contain all information about your gsm sim network. It may possible that you can find network locking code inside nv data file. So remove that code and unlock your lg v10. Also search inside root/carrier folder, root/system, system/bin folder for carrierlock file or networklock file or simlock file. If you find any such file that has hidden unlock code in hexadecimal. So open those files with hexa editor and calculate your unlock code. It is not necessary that such file always exist inside your lg v10 this is just one trick.

 First method to unlock lg v10 at&t , tmobile without sim network unlock code.
                                     This is only applicable to European version of lg v10 h960a android m unlocking. but if you are from other countries like united states of America, united kingdom, middle east eventhough you can try for this if you get unlock.bin file after registration then you are eligible for v10 unlocking. Here is the lg g5 sim unlocking for free by bootloader unlock method. You can also use below method for lg g4 and lg g5 unlocking.

       1.      First download android software developer kit from developer site. To download sdk kit for lg v10 go to developer lge site and then click on android. New page will be open. Then click on sdk & tool.

       2.       Now explore android software developer kit, from that your require
-          Adb /Android debug bridge exe file.
-          Adbwinapi.dll     this is for windows operating system. If you are using linux or mac pro then this file will be different.
-          Also download lg usb driver for android smartphone.
-          Adbusbapi.dll for compatibility with usb as you are connecting your lg v10 mobile to computer via usb cable.
-          Fastboot executable file.

        3.      Now enable usb debugging mode on your lg v10 android Smartphone. To enable usb debugging go to v10 android setting – developer option. Without this computer not able to detect lg v10 smartphone.

       4.      For adb- android debugging bridge also requires usb debugging enabled. Without that adb cant able to make bridge between lg v10 mobile and computer. Adb act as an interface between lg v10 smartphone and computer without this lg v10 can’t communicate with computer.


      5.      Now we are unlocking lg v10 h960a European and lg v10 android m via bootloader unlocking.

     6.      Now oem stand for original equipment manufacturer here it is lg electronics. To enable oem unlock go to lg v10 android setting – developer option – activate oem unlock option. But if you are doing lg v10 unlocking from imei generated sim network unlock pin, in that case you don’t need to activate oem unlock.

     7.       First go to developer lge website and not lg website. At the bottom of the page there is a mobile resource tab click on android.
Now new page open click on unlock bootloader tab.
At the bottom of that page click on starting unlocking the bootloader.
Then it ask for a registration, register yourself it is free. During registration it asks information about lg v10 smartphone.
- Your name, your email address- you will receive unlock.bin key file on this email id.
- Now select lg model as we are unlocking lg v10 smartphone for Europe. There are also lg g5 and g4 model which you can unlock with this method.
- provide lg v10 imei number or meid no.

8.  lg v10 device id. You can find lg v10 smartphone device id by following way.
 - Open command prompt on your windows computer or mac and change directory to where you have stored above software developer kit / sdk.
- Now enter this command -     adb devices.
- This will provide you the list of all external android devices connected to your computer. If lg v10 not in that list then install lg android usb driver to your computer. Now your computer detects lg v10 android.
- Device id of lg v10 consists of 64 characters that contain alphabet and numbers. You need to reboot your lg v10 smartphone and also remove all other android devices connected to your computer.
- Now at the command prompt enter following command –
 adb reboot bootloader.      
This reboot your lg v10 in fastboot / bootloader mode.

Now enter command -     fastboot oem device-id.

Command gives you below result
Lg v10 bootloader) device-id.
Lg v10 bootloader) 32 character string.
            Bootloader) another 32 character string.
                        Now lg v10 device-id is above 32character+32character without space that is 64 character device-id of lg v10 android.

9.      Now enter device id to registration form and click confirm to submit lg v10 all details for unlock.bin key file.

10.   After verification you will get lg v10 unlock.bin file to your email id.

11.   Now copy unlock.bin key file to your lg v10 mobile phone. Now you need to overwrite lg v10 memory with unlock key code so that you can use lg v10 on any gsm sim network.

12.   Now flash your unlock key file to lg v10 mobile by following command. After that your lg v10 fully unlocking and you can use any sim on lg v10.

13.   Now go to run prompt and type   --    adb reboot bootloader.

This will reboot your lg v10 mobile in fastboot / bootloader mode. Now go to the directory where you have copied your unlock.bin key file.

14.   Now type this command     --     fastboot flash unlock unlock.bin.    

This will fully unlock your lg v10 android smartphone.

15.   To check that lg v10 unlocked or not  first type this command

Adb reboot bootloader.

 By this lg v1010 enter into bootloader mode
-          Now enter command     --     fastboot getvar all.
-          Response of the command is
    Bootloader ) unlocked: yes

Now boot lg v10 into system mode by   -- fastboot reboot command.
 You have unlocked lg v10 mobile.

Second method How to sim unlock lg v10 mobile by imei generated sim network unlock pin for lg v10 all models like v10 dual sim h961n, h962 model, lg v10 h900 /901, h960, vs990, v10 f600s / k /l.

                       There are many lg v10 unlocker software tools available on net. You go to search result upto 4, 5 pages. There are many software unlock tool depending upon your lg models like at&t lg v10, lg g5, g4, t-mobile lg v10 etc.
 To generate sim network unlock pin for lg v10 at&t, t-mobile you need following information about your lg v10 android phone.
       1)      Imei number of your lg v10 mobile.

       2)      Make and model of your smartphone: that is lg electronics and models are lg v10 dual sim h961n, h962, h900 /901, h960, vs990, v10 f600 s / k /l.

      3)      Mobile country code / mnc : each country has its own mobile country code.

United States of America mnc is 310, Canada =302, United Kingdom=234, Australia=505, France=208, Germany= 262, Ireland= 272. Saudi Arabia =420, Oman=422, United Arab Emirates=424.


      4)      Mobile network code /mnc : each gsm sim provider has its own mobile network code. These codes are different for same sim provider for usa and uk. For example at&t usa mnc code are 070,090, t-mobile mnc usa=026.
O2 uk mnc =2, o2 germany mnc=7 /8. Sprint, Verizon, bell, telus each has its own mnc code for different country. You can get this from sim manual. You can find how to get lg imei unlock codes for lg g2 and lg g3 unlock code. Though all these method have same criteria to generate lg imei unlock code.


      5)      Sim serial number: some software tool require sim serial number but this number is not necessary.

      6)      Lg android installed with android os version: kitkat 4.4 – kitkat 4.4.4. , lollipop 5.0 – 5.0.1 and marshmallow 6.0 – 6.0.1.


After providing above information, it generate following different kind of sim network unlock code.

1)      Nck / network carrier code / network control key: this is most widely used unlock code. When you insert new sim to your lg v10 is ask for sim network unlock pin for your lg v10. Enter this nck code.  Nck code is a network unlock code for your lg v10 smartphone. To unlock o2, orange,At&t, t-mobile  lg v10 you should enter network unlock code nck.

2)      Spck / service provider code key : this is sim service provider unlock code. To unlock bell sim, telus and fido sim, you should use spck service provider unlock code. When you enter new sim to lg v10 android and if it prompt for sim network unlock code for lg then enter this spck code.  Many time you need to enter both nck and spck code specially bell sim unlocking metropcs sim and fido sim unlocking.



3)      Nsck / Sub network code key / network subset key: many gsm company in America use at&t, t-mobile gsm network as parent network and they only have sub network. In Canada many sim provider use bell, telus network and in UK and Europe many sim company use o2, orange and vodafone network and those sim provider only have sub network. So to unlock such a sim card you should enter nsck code- network subset unlock code when mobile ask for sim network unlock pin for unlocking.


4)      Cpck / cck /corporate unlock key: many major industry purchase buck of mobile for their employees and to unlock those lg mobile you require corporate unlock code.


5)      Simck / sim unlock key : this is sim unlock code. Enter this unlock code when lg v10 aks for sim unlock code. This is not widely used code

6)      Unfreeze / deepfreeze code: normally these codes are not used for lg smartphone. Cellphone got freezed when it has roaming lock or when you have tried 5 or 10 unlocking attempt and mobile got hard locked.

                                              Now after you get lg v10 sim network unlock code, insert any sim to lg v10. It ask for sim network unlock pin – unlocking attempt 1 of 10 unlock or dismiss. That means you have maximum 10 unlock attempt.

                             Now enter correct sim network unlock pin for your lg v10 which is of 16 digits.  Normally you should use nck code and tap on unlock.  If your mobile is successfully unlocked you get message that sim network unlock successful.

                                But if you get the message that sim network unlock unsuccessful then enter service provider unlock code – spck and many time bell, tenus and fido require both network unlock code and service provider unlock code. So first enter nck code of lg v10 and then enter spck code for lg v10.

  I hope above lg v10 unlocking method help you to unlock all your lg v10 models.