Unlock code for mobile phones Nokia Lg Samsung Free Unlock codes

Free Nokia Unlock codes

2007-04-12T12:00:00.000-07:00

Unlock Codes for Mobile Phones- free Nokia Samsung Unlocks

NOKIA
cell phone code :These Free Nokia Unlock codes will work on most Nokia Mobile Phones
(1) *#06# For checking the International Mobile Equipment Identity (IMEI Number).
This is useful when your mobile is lost or stolen.Free Motorola and Samsung Unlock codes are in another post.

If u find any difficulty to understand this Unlock code for Mobile Phones please write in comment section.
2) *#0000# Displays your phones software version,
1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favorite )
(3) *#9999# Phones software version if *#0000# does not work.
(4)*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%

If mobile is locked you can check by this way

(8) #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(9) #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(10) #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(11) #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

How To unlock mobile Phones like Samsung, Nokia and Motorola
For different networks they lock different locks. Each code also unlocks different locks. You need to type your code into your handset as follows
#pw+[one of the below numbers]+x#

{To get the p push your * key 3 times, the w is the * pushed 4 times and for + is the *pushed2 times. }
X= how far down that list the number you are using is...

014023433202622 (1)
426357740475450 (2)
907372026565074 (3)
845941163371047 (4)
484167302243762 (5)
497227217504624 (6)
705550724347656 (7)
You should always try code 7 and 1 first.
So you would type for code7

#pw+705550724347656+7# and
for code 1 it is
#pw+014023433202622+1#.To get the p push your * key 3 times, the w is the * pushed 4 times and+ is the pushed 2 times.
When the lock has been removed it will say "SIM restriction off" or somthing similar.

(12) *#147# (vodafone) this lets you know who called you last.
(13) *#1471# Last call (Only vodofone).
(14) *#21# Allows you to check the number that "All Calls" are diverted to
(15) *#2640# Displays security code in use.
(16) *#30# Lets you see the private number.
(17) *#43# Allows you to check the "Call Waiting" status of your phone.
(18) *#61# Allows you to check the number that "On No Reply" calls are diverted to.
(19) *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.
(20) *#67# Allows you to check the number that "On Busy Calls" are diverted to.
(21) *#67705646# Removes operator logo on 3310 & 3330.
(22) *#73# Reset phone timers and game scores.
(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.
24) *#7760# Manufactures code.
(25) *#7780# Restore factory settings.
26) *#8110# Software version for the nokia 8110.
(27) *#92702689# (Favourite)
Displays -
1.Serial Number,
2.Date Made,
3.Purchase Date,
4.Date of last repair(0000 for no repairs),
5.Transfer User Data. To exit this mode you need to switch your phone off then on again.

(28) *#94870345123456789# Deactivate the PWM-Mem.
(29) **21*number# Turn on "All Calls" diverting to the phone number entered.
(30) **61*number# Turn on "No Reply" diverting to the phone number entered.
(31) **67*number# Turn on "On Busy" diverting to the phone number entered.
(32) 12345 This is the default security code.press and hold # Lets you switch between lines
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4

Nokia unlock codes 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #

NOKIA 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

NOKIA 3330 unlocks
*#06# This will show your warranty details *#92702689#
*3370# Basically increases the quality of calling sound, but decreases battery length.
#3370# Deactivates the above
*#0000# Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370# Half Rate Codec activation. It will automatically restart
#4370# Half Rate Codec deactivation. It will automatically restart

Restore Factory Settings To do this simply use this code
*#7780# Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only) This will put your phone into programming mode, and you'll bepresented with the programming menu.
2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours, ask your local dealer for it.
8) Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code To check the ISDN number on your Nokia use this Free nokia Unlock code *#92772689#.::

As I tried to collect most common Unlock code for mobile phones.It may not work with some models.

Format Nokia 6600

2007-04-11T07:03:00.000-07:00

FULL Formatting Nokia 6600 & 6630 phones

If you have nokia 6600 or nokia 6630 and you are facing problem like
black screen phone and unable to reboot ,
error message such as “child installer” keep popping-up.
phone start only at “Nokia” word screen or
it may possible that you are not able to uninstall some program after installation

Full formatting nokia 6600 and 6630 phones will solve these problems.

but before formatting take few precautions

1)Make sure battery is fully charged atleast 70 to 80 %.

2)Take back up of all important data like contacts list and personal files.

now
3)Switch-off your 6600 phone.

4)Press and hold these 3 keys at the same tome;

Green dial key, * (star key) & no. 3 key
Then press the power on/off to swtich on the 6600 phone.

hold all pressed keys until you see a formatting word screen show!

5. After a few minutes when your nokia phone’s full formatting completed, your 6600 will back to original system and factory settting.

All apps installed and data will not available you need to install everything except default applications. Now restore your back up.

This is Work with all devices. here is link for nokia unlock codes.

Mobile trick to increase memory

2007-04-04T00:57:00.000-07:00

Mobile Phone tricks to increase memory

In last post you have seen many free mobile phone unlock codes. Now free tricks for mobile phone to Increase your mobile memory

By regularly checking the task manager you can make more free memory by closing the background application

Second method - Smart Launcher trick:

For smooth working of mobile phones it is needed to have more free memory and everyone like that mobile work smoothly.Soo and there are software available like smart launcher by which you can increase free memory in your mobile same you are doing with your computer.

First install smart launcher to your mobile and go to option.
Then setting and make launcher on. Now plug on your charger and switch of your phone.

Wait till it shows battery meter on screen and then press Menu button of your mobile don’t hold it just press for a while and release.
You can see Manu on screen and you can have 4 to 5MB free RAM
Hold Menu button to check RAM.

Trick behind this is that when charger plugged in, the phone must have a minimum software for charging your mobile, somehow Smart Launcher has still got it's shortcut running and that's the Menu button appear. So when you click Menu button, you go directly to the Menu, no other phone tasks running in the background so you trick the phone and you have more free RAM!

Third method

Start your phone in flight mode by using Psiloc system tools. Install system tools and open it and select flight mode. With this you can restart the phone without using your SIM card. So no other application running in back ground you can have more free RAM.

forth method

By this way you can increase around 200-300KB space but I think it is useful for you.soo be like smart guy don’t close your menu by selection right selection key and exit or pressing the menu key another time. These ways it only hides the application but do not close it. To close it, choose the left selection key and option and scroll down and then select "exit".

Motorola Unlock Codes

2007-04-01T23:57:00.000-07:00

Motorola unlock code-V300 Motorola razr Cell phone Unlock

Unlock motorola codes for v3 and razr.

motorola cellular T205/T19x
most of the code applicable to Motorola d460,6200,Motorola cellphone 7500,
Motorola Unlock codes for 8200,8400, 8700,V3688.
*#06# -> Displays imei for
*#300# OK -> List the Software & Hardware Version of motorola cellular
*#301# OK -> Full Keypads Functional Test
*#303# Ok -> Set Default Language to English
*304# OK -> Set OFF engineering mode new cellular phone
#304*19980722# -> Set ON Engineering mode
*#305# OK -> Location: 1 OK
*#307# OK -> Engineering Test Mode
*#311# OK -> Phone code changed to default code
*#400# OK -> ADC, Cal val*
*#402# OK -> Adjust Display Intensity/Contrast
*#403# OK -> List the manufacturing Informations of motorola cellular
19980722 OK -> Master Unlock code for Phone & Sim
Lock.
this code are independent of whether it is new cellular phone or pre paid cell phone.And it may work with one model and not working with other model like Unlock Motorola rarz code may not work with motorla v3.
*#302# OK -> Acoustic Test*
*3370# -> Enhanced Full Rate
#3370# -> Deactivate Enhanced full Rate
*#72837726# OK -> Confirm?, Data Saved
1234 OK Phone Code Default
*#0000# OK -> Settings saved, restore set phone
to default language.

new cellular phone EFR:

###119#1#, (OK) to activate EFR mode.
###119#0#, (OK) to deactivate EFR mode.

Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.

Other Secret Master Codes for Motorola phones.

Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu of motorola cellphone:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] [] [] 1 0 7 [] 1 []
Copy SIM memory (phonebook menu):
[] [] [] 1 0 8 [] 1 []
Eng Field options (main menu):
[] [] [] 1 1 3 [] 1 []
Slow (Frequency of search menu):
[] [] [] 1 0 1 [] 1 []
Medium (Frequency of search menu):
[] [] [] 1 0 2 [] 1 []
Fast (Frequency of search menu):
[] [] [] 1 0 3 [] 1 []
Enable EFR:
[] [] [] 1 1 9 [] 1 []
Function :
[] [] [] # # # [] 1 []

Change pin:
[] [] [] 0 0 4 [] 1 []
Unblocking using the "puk" number:
[] [] [] 0 0 5 [] 1 []

You can change motorola cellular GSM frequencies to 900/1800 by entering the enginnering model. Following the below steps:
enter menu and press 048263* quickly, then you will enter the secret engineering menu
under "Opcode"
input 10*0*3 for GSM 900
10*0*4 for GSM 1800
10*0*5 for GSM 1900
10*0*6 for dual band GSM 900/1800
10*0*7 for dual band GSM 850/1900

To add extra message space 4 your Motorola C350 C450 C550 or C650, press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.You will receive an extra 50 msgs memory space.Switch phone off and back on.(not tested)

Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK]
* - press this until box shown up

Activate RBS (Radio Base Station) Motorola cellphone.

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This only works with some versions of software.

What's the use of RBS:

Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

Other Phones from Motorola cellular (CD 160, CD 520, 920, 930)
new cellular phone Motorola CD 160
Press menu and type one of these numbers and press OK:

11 = Status Review for new cellular phone
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer for Motorola cellular
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode.

Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.

Keyboard lock fo Motorola cellular
if you push * and # on the same time your keyboard locked. When you press it again, you unlock your keyboard.

Supplementary Menu for Motorola cellular
If your Motorola CD920 or 930 has the engineering software, you can get an engineering mode by typing : ***113*1*, but you have to maintain each * during 3 sec to get a square. So 3 squares, 113, 1 square, 1, 1 square, CALL.
If the software is present you have one supplementary menu. To remove it typ ***113*0* like above.

To put the counter to 0 even global counter, just do a reset factory in the Config menu.

In future give u more on Motorola unlock codes for v3 and motorola rarz cellular phone.

Ericsson Siemens Unlock Codes

2007-04-01T23:54:00.000-07:00

Ericsson

Ericson T65

*#05# Fake Insert puk screen Press no to exit
Ericsson T20
MENU tecnichal Info
[type] >*<<*<* Displays : 1] Info service
1] Info SW 2] Info hardware 3] SIMlock 4]setup

2] Service setup1] Contrast
3]Service Test
1] Display 2]Leds 3]Keyboard 4] ringer 5] Vibration 6]Headset 7] Microphone
8]Clock
4] Names List
MENU info
[Type] >*<<**<>EricssonT28
>*<<*<* menu Tecnichal info SW vers. and name list >*<<**<> are the right and left.

menu's keys Ericsson T18s/T10/A1018s

>*<<*<* software CXC125065 Internal product code PRG 970715 1515 Software version and SW rev.<* CLR <><**>*<<*<*> Displays texts and messages in the phone It will be displayed " TEXT " then push YES <> are the right and left menu's keys !!!><** Control /Enable SIM Lock!!!. Ericsson R310 Technical Info :
>*<<*<*Options :1) service Info info Software Simlock Configuration 2) Service Test Display Led/Illumination Keyboard ringer Vibration Headset Microphone Clock 3)Text's name List Info personal : >*<<**< color="#3333ff">
Siemens :-
Siemens C25

IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1

Bosch:-

IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #

Alcatel:-
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *

sagem Service Codes

2007-04-01T23:45:00.000-07:00

SAGEM Mobile Service Code
This are the segem mobile service code to help mobile repairing. Keep in mind this are not sagem unlock codes. Sagem phones unlocking codes are different from service code.

Segem Secret Codes
*# Commands
to check IMEI number *#06#
Corresp. ID incoming displayed - *#30# followed by send
Your ID. outgoing displayed - *#31# followed by send
Call barr inactive - *#33# followed by send
Call barr inactive - *#35# followed by send
Call Waiting - *#43# followed by send
Your mobile number - *#100# followed by send
DHLRU1 ?meaning? - *#101# followed by send
Transmitter information *#102# followed by send
Current date and time *#103# followed by send
Last caller's number - *#147# followed by send
Call credit and service time left -*#1345# followed by send

Hidden menu sagem phone
Engage one of the menus with the scroller then press *
Application menu: option 1 Version, option 1 Battery
Prom menu: option 1 IMEI number
sagem Sim lock: option 1 Sim lock - press okay for 30 second countdown, C button to cancel (caution with this I don't know what happens when the counter reaches 0!!, it may lock up your telephone's SIM card.

Network: option 1 Option not available
Test LCD: option 1 Symbol 1 Tests screen, option 2 Symbol 2 Tests screen, option 3 Black Tests screen, option 4 For photo Tests screen, option 5 Tests the vibrator

Type MENU - 5 - 1 - 1 - # to enter Engineering menu on SAGEM (RC-712, 721, 815 and 815 plus) mobile phones.

Hope this sagem code help you. Diffrent sagem model may have diffrent code like diffrent unlocking codes. some code may not working with sagem.

Samsung cellular phone unlock

2007-04-01T09:38:00.000-07:00

Samsung cellular phone Unlock CODE

Samsung cellular phone SGH-600 : *2767*3855#

samsung S100, S300, V200 : *2767*7822573738#

---A300, A800 : *2767*637#

---X100 : *2767*688#

samsung cellphone sgh-600 mobiles : *2767*3855#

s100,s300,v200 : *2767*7822573738#

s105 mobiles : *2767*7822573738#

After the phone reboots enter the following code : #0111*00000000#

Personalisation cancelled should be displayed. cellular phone is now unlocked

a800,a300 mobiles : *2767*637#

t100 : *2767*media#
*2767*full#
*2767*cust#
*2767*wap#
*2767*stackreset

for example stackreset = 7822573738

e700 : *2767*688#

Here some more codes for samsung T100

*#8999*228# -> Battery status (capacity, voltage, temperature)
*#8999*246# -> Program status for samsung mobile phones
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens of cellular phone
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status for samsung phone
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version of new cellular phone
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

all samsung s300 and v200 and s500 : Free unlocking by codes

samsung mobile phone s300 and v200 :

*2767*63342# and press green button
*2767*3855# and press green button of samsung cellular phone
*2767*2878# and press green button
*2767*927# and press green button
*2767*7822573738# press button of samsung cellphone

samsung mobile phone s500 : *2767*688#

Mobile phones Tips Tricks

2007-04-01T09:14:00.000-07:00

Mobile phones Tips and Tricks

Along with free unlock codes for mobiles I added few Mobile phone tips and tricks.

Tip 1
For Nokia N-Gage User: - you can install .sis files directly to your mobile by simply using the cable given with your mobile phones. Just do the following
Plug cable to your mobile, place the .sis file anywhere on (MMC) and not in any folders then disconnect the cable and look for it in File Manager. You can find it there

Tip 2
By regularly checking the task manager which can be accessed by holding down the menu button you can save on battery and system memory being used by mobile phone and this make your mobile working smoothly.You can put your query about Unlock code for mobile phones in comment section

Tip 3
It is advisable to keep your Bluetooth off or set cellular phone visibility to hidden this will avoid being "blue jacked" .You can check this by searching blue tooth device from your mobile when you at public place say at garden or shopping mall or stadium.
Tip 6
You can save memory when installing apps by Bluetooth. This is done by using the nokia phone suite and a serial Bluetooth connection. This trick only work with .sis files

Tip 4
When you view picture in your mobile phone, here is few shortcut keys.
5 - Zoom in.
0 - Zoom out.
* - Toggle on/off of full screen
1 - Turn image anticlockwise.
3 - Turn image clockwise.

I added free unlock codes for mobile phones on first post

Tip 5
Following Formats of images are supported:
JPG UPF GIF87a/89a WBMB MBM TIFF/F PNG EXIF

Tip 6
You can record entire talk on phone by the (sound) Recorder.
Go to Manu -- Extra's-- Recorder -- Options -- Record sound clip.
Note: Short beeps are audible during call registration.
There are also some software available for this.

Tip 7
When you are writing text,
Press hass"#" to switch between upper and lower case
Press and hold "#" to switch between Alpha mode and Number mode.

Tip 8
If you are in stand by mode and want to check contacts.
Press scroll key center (joystick) this will take you directly to Contacts.

Tip 9
Now most of us using mobile phone for time instead of clock. If you have your key lock activated then just press the on/off button of your mobile phone to turn on your backlight to look at the time when it's dark without having to unlock the keypad.

Tip 10
You can disconnect to your GPRS session by Keep the Red Call End button pressed.
Tip 11
You can switch between phone lines by keeping the hash "#" button.

Nokia Phone Unlock Codes

2007-04-01T00:28:00.000-07:00

Nokia unlock codes

Nokia phone unlock codes for free. There are different nokia unlock codes for different nokia models like nokia 6288, n95, Nokia 6682, 7270, 6280, 1600, Nokia 6130. Even there are two types of mobile unlocking service provider unlocking – sim unlock. You can also get mobile unlocking software that will generate codes for unlocking
Free Nokia Cell Phone Unlock Codes

1) Unlock Nokia 6600 (Orange, UK)
#pw+399466210777312+1#
#pw+719950237732007+5#
2) Unlock Nokia 3390 (Fido, Canada)
#pw+6595657252+1# or
#pw+4474052474+1#
3) Unlock Nokia 6102 (Cingular, USA)
#pw+939652056653040+1#
4) Unlock Nokia 6820b (AT&T, USA)
#pw+895421713251412+1#
5) Unlock Nokia 6102b (Cingular, USA)
#pw+324556243142742+1#
6) Unlock Nokia 6010 (T-Mobile, USA)
#pw+748900573631603+1#
7) Unlock Nokia 3120 (Vodafone, Spain)
#pw+008923325642375+7#
8) Unlock Nokia 6101 (T-Mobile, USA)
#pw+110464135761655+1#
9) Unlock Nokia 6230 (Vodafone, UK)
#pw+737190152533105+7#
10) Unlock Nokia 7600 (3 Network, UK)
#pw+448917267516205+1#

Motorola codes

2007-04-01T00:14:00.000-07:00

Motorola cdma service codes:
motorola unlock codes are diffrent from this motorola service codes and this motorola codes are for cdma phones not for motorola gsm mobile cellular phones.
StarTAC 7760/7860 programming:
Service menu: FCN+0+000000+000000+RCL
Test mode: FCN 00**83786633 STO
V60c programming:
Service menu: 74663 # [Menu] [Menu] (programming code)
Test mode: [Menu] 073887 * (security code = 000000)

Motorola Tarpon (120x)
1. Press 74663 (spells PHONE)
1. Press # MENU MENU quickly
2. Enter OTKSL
3. The work MIN will be highlighted
4. Select the word CHANGE by selecting the top right button
5. Select DELETE. Press and hold the button until clear
6. Have the customer enter the 10 digit MIN number
7. Select OK with the top right button. The “User Activation” screen will appear
8. Scroll to highlight the CDMA Sys ID
9. Select CHANGE by selecting the top right button
10. Enter SID
11. Select OK by selecting the top right button
12. Select DONE with the top left button
13. Press the END key
14. Press # MENU MENU quickly
15. Enter OTKSL
16. The work MIN will be highlighted
17. Select the word CHANGE by selecting the top right button
18. Select DELETE. Press and hold the button until clear
19. Have the customer enter the 10 digit MIN number
20. Select OK with the top right button. The “User Activation” screen will appear
21. Scroll to highlight the CDMA Sys ID
22. Select CHANGE by selecting the top right button
23. Enter SID
24. Select OK by selecting the top right button
25. Select DONE with the top left button
Press the END key

Motorola Phones (ALL)

1. Enter 74663 # FCN FCN
2. Enter OTKSL
3. Enter MIN and press STO
4. Enter SID (4654) and press STO
5. Press STO again – programming is complete
Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.

LG Codes

2007-04-01T00:10:00.000-07:00

LG cdma service code

This LG Codes are different from lg unlock codes.

LGC-300 programming: menu + 9 and enter SPC: "000000" or may be other SPC typed by user
A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key
LGC-330W programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-800W /500 programming: menu + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-510 programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key

LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200

1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete

LG5350

1. Enter ## and enter the OTKSL and press the left soft key under the word “Save”
2. At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key

Samsung CDMA Codes

2007-04-01T00:02:00.000-07:00

Samsung cdma Service Code

Samsung unlock codes are different then service codes.

Samsung:
All type of phones (old modeles):

NAM

programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##

Samsung A500

1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete

Samsung N240 and N400
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming

Samsung Uproar
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete

Samsung N300
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #